SDL202

Spherical Image - RICOH THETA

In this room you can project from the desktop computer, a laptop using VGA or HDMI and you can watch a Blu-ray or DVD.

In this room you can project from a laptop through VGA and HDMI, the desktop PC or watch a DVD or Blu-ray film.

Turning the System On - Press the On button on the button panel. This will turn on the projector.

Screen - This a manual screen. You will need to pull it down by hand.

Volume - You can control the volume in the room with the volume dial and you can mute the volume.

Projecting from VGA - Press the Laptop VGA button. Connect the VGA cable to your computer, you should have projection , but if you don't, go to the troubleshooting section of the page.

Projecting from HDMI - Press the Laptop HDMI button. Connect the HDMI cable to your computer. You should have projections, but if you don't, go to the troubleshoot section of the page.

Projecting from Desktop - Press the PC button. If the desktop is not projecting, contact the Helpdesk at x2200 for immediate assistance.

Playing a DVD/Blu-ray - Press the Blu-ray button. You might have to power on the Blu-ray player. Insert your disc and press play.

Turning the System Off - Press the System Off icon at the bottom on the right of the touchpanel screen. Confirm that you want to turn the system off.

Troubleshooting - If you are have difficulties projecting, go to go/troubleshoot for more tips on troubleshooting projection problems or contact the Helpdesk at x2200