Middlebury

Difference between revisions of "Connect To Network Printers - Mac OS X"

m (Undo revision 40793 by Cynthia Slater (talk))
Tag: Undo
(hid content; linked to KB article)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 +
Content for this wiki page has been moved to the TeamDynamix Knowledge Base:
  
To use a networked departmental printer you need to obtain its exact network print queue name, available from the [http://www.middlebury.edu/offices/technology/help/technology/printing/locations/list-of-printers printer list]. Look for a sticker on the printer showing this information. Co-workers and department coordinators may also be able to provide you with the needed name(s).
+
https://support.gmhec.org/TDClient/47/middlebury/KB/ArticleDet?ID=141
 
 
Once you have obtained the printer queue name(s), simply follow the steps below '''on your College-owned computer''' to connect to desired printers, then set a default printer that you use most often.
 
 
 
== Connect to Network Printers easily using JAMF Pro's Self Service on a Mac ==
 
 
 
#Navigate to the '''Utilities''' folder on the Mac using the Finder menu ('''Go''' > '''Utilities''').
 
#Double-click '''Self Service''' to launch this program.
 
#Click on '''Printers''' located on the right-hand side of the Self Service window, under ''Categories''.
 
#Scroll or use the search field at top right to locate a desired printer, then click its "'''Install'''" button.
 
#*If you cannot find the printer you want in Self Service, you will need to follow the instructions below, ''Connect to Network Printers Manually on a Mac''. 
 
 
 
 
 
 
 
== Connect To Network Printers Manually on a Mac ==
 
 
 
#First, get the make and model of the printer. The printer itself should show the model number in a prominent location. Write this down for later.
 
#Click on the [[File:Mac Apple Menu icon.PNG|RTENOTITLE]] menu and choose '''System Preferences'''.
 
#Under the '''Hardware''' section, click [[File:Print and fax mac.jpg|RTENOTITLE]] (Print & Scan).
 
#Click the plus icon (+) to open the Printer Browser.
 
#In the printer configuration dialog box, enter the following settings:
 
#*Click on the '''IP '''button on the toolbar - the third from left.
 
#*In the '''Address '''field, type one of the following print servers, as appropriate:
 
#**'''Walnut''' -- Queues for departmental printers
 
#**'''Seaotter''' -- Queues for MIIS printers
 
#**'''Papercut''' -- Queues for public printers 
 
#*[[File:Mac Printer Setup.png|RTENOTITLE]]
 
#*In the '''Protocol '''drop-down list, leave it as '''Line Printer Daemon - LPD'''.
 
#*In the '''Queue '''field, type the printer's '''network name''' (ie, LIB142 or JHN405).
 
#*In the '''Name '''field, type a name for the printer. (It is strongly suggested to change this from the default, which just lists the server, to the network name.)
 
#*In the '''Location '''field, type the location of the printer. (Optional)
 
#*In the '''Use:''' drop-down list, choose '''Select Printer Software...''' Then use the search field to find and select the closest printer model (ie "HP Laserjet 4050 Series"). Try to select the "vanilla" print driver for your model of printer; avoid "PS" or other suffixes.
 
#**If you don't see any appropriate drivers listed, check the model again, then download the drivers from Self Service and start over. (If you don't see Self Service under Applications/Utilities, you should get it by following the instructions at [http://go.middlebury.edu/casper go/casper].)   
 
#Click '''Add'''. Your printer will appear in the Print & Fax dialog box.
 
#If additional configuration dialog boxes come up, you may want to check the '''Duplex '''or '''Duplex Unit''' checkbox (if you plan to use double-sided printing). You can safely leave the other options at the default settings.
 
#To change the default printer, select it in the '''Default Printer:''' drop-down list in the Print & Scan dialog box.
 
#Close the Print & Scan dialog box.
 
 
 
 
 
 
 
== Set Your Default Printer ==
 
 
 
Follow these steps to be sure the printer you use most often is selected as your default printer:
 
 
 
#From the Apple menu or your dock, open '''System Preferences'''.
 
#Click '''Printers & Scanners'''.
 
#Use the drop-down menu to adjust the '''Default printer''' setting as needed.
 
 
 
 
 
 
 
== Printing Double Sided ==
 
 
 
You can print double-sided (or duplex) with a given printer, if:
 
 
 
*The printer supports double-sided printing.
 
*This option was enabled when the printer was installed on your computer.
 
 
 
Start out with these steps to check if your printer has been configured to print duplex:
 
 
 
#Open the application that you will be using to print (e.g. Microsoft Word).
 
#From the '''File '''menu select '''Print'''. The Print dialog window appears.
 
#Click on '''Presets''' drop-down list. If there is an option titled '''Double-Sided''' or '''Duplex''', continue with these steps. Otherwise, skip to the instructions under "Create a Duplex preset setting" below, then come back to these steps once you're done.  
 
#Click '''Print''' to print the document double-sided.  
 
#When you want to print double-sided in the future, select the Double Sided option under the Presets menu. When you want to print single-sided, use the Standard option under the Presets menu. These settings are saved across all applications.
 
 
 
 
 
 
 
==== Create a Duplex preset setting ====
 
 
 
Follow these steps after reaching the Print dialog box in any application (see the above steps).
 
 
 
#From the '''Copies and Pages''' drop-down list, select '''Layout'''.<br/> Note: If you do not see the '''Copies and Pages''' option, click on the arrow next to the printer's name. The '''Copies and Pages''' option should become visible.
 
#Choose the '''Long-edge binding''' option under the '''Two-Sided''' heading.<br/> Note: If the Two-Sided option is grayed out, the printer is not capable of double-sided printing or you need to reinstall the printer using the correct driver (follow the steps at the beginning of this document).
 
#Save the duplex setting:
 
#*From '''Presets '''drop-down list select '''Save As'''. The '''Save Preset''' dialog box opens.
 
#*In the '''Save Preset As''' field, type '''Double Sided'''.
 
#*Click '''Add'''. 
 
 
 
&nbsp;
 
 
 
== Printing in Color on a Mac ==
 
 
 
See this page: [[How_to_Print_in_Color_on_a_Mac|How to Print in Color on a Mac]].<br/> &nbsp;
 
 
 
== Xerox Printer Note ==
 
 
 
If you are connecting to a Xerox printer with job accounting, follow above instructions for installing printer. &nbsp;You may need to download and install the current Macintosh driver for the printer model before installing. &nbsp;
 
 
 
#While the instructions above apply to installation of Xerox printers, please see [http://mediawiki.middlebury.edu/wiki/LIS/Installing_a_Xerox_Workcentre_5150_Printer_on_Your_Computer here] first.
 
#As of August, 2011, the Xerox drivers do not support 64-bit Macintosh programs. &nbsp;If you cannot print from an application and find that the "Accounting" option mentioned above is not available, choose another application - or run the application of your choice in 32-bit mode (select the application - File - Get Info - check "Open in 32-bit Mode").
 
 
 
&nbsp;
 
 
 
== Remove a Printer ==
 
 
 
You can easily remove printers you no longer use, as well as ones that refer to the obsolete Bombay printing server. Here's how:
 
 
 
#From the Apple menu or your dock, open '''System Preferences'''.
 
#Click '''Printers & Scanners'''.
 
#In the ''Printers'' pane at left, click once on the printer you wish to remove, then click the "minus" sign below.
 
#Click the '''Delete Printer''' button when asked to confirm your choice.
 
 
 
 
[[Category:Mac]] [[Category:Printing]] [[Category:Papercut]] [[Category:Printer]] [[Category:Printers]] [[Category:Helpdesk Documentation]] [[Category:Public Search]]
 
[[Category:Mac]] [[Category:Printing]] [[Category:Papercut]] [[Category:Printer]] [[Category:Printers]] [[Category:Helpdesk Documentation]] [[Category:Public Search]]
 +
[[Category:TDXKB]]

Latest revision as of 10:52, 26 August 2021

Content for this wiki page has been moved to the TeamDynamix Knowledge Base:

https://support.gmhec.org/TDClient/47/middlebury/KB/ArticleDet?ID=141

Powered by MediaWiki