Middlebury

Difference between revisions of "Distributing Windows Computers"

Line 3: Line 3:
 
<br>1. __Power up the computer, (if Desktop, use a '''USB keyboard''') and press '''F12 '''when F2 or F12 appears. <br>2. __Place an appropriate '''BartPE CD''', which is compatible with computer Model, into the CD drive tray. <br>3. __Select the '''CD-ROM '''drive to BOOT to BARTPE CD, which will <u>auto-map </u>to'''\\Hawk\ghost '''<br>4. __Click '''OK''', at the '''PE Network Configurator '''screen. <br>5. __Click '''OK''', at the '''About Symantec Ghost '''screen.<br>6. __Select '''Local''', then '''Disk''', then "'''From Image" '''at the '''Symantec Ghost '''…screen.<br>7. __Select '''‘Network Drive’ '''from <u>Look in</u>: pull-down menu on ‘'''Image file name to restore from’ '''..screen.<br>8. __Select the <u>correct folder </u>(i.e., __Desktops or __Laptops… etc) which contains the image for the computer Model.<br>9. __Select the <u>correct image </u>for the computer Model you are imaging. (Use arrow-down to read Image file description)<br>10. __Click '''OK''', at the '''Select local destination drive'''… screen.<br>11. __Click '''OK''', at the '''Destination drive Detail '''…screen.<br>12. __Click '''Yes''', at the question: – '''“Proceed with disk restore?” '''…screen. <br>13. __Click '''Reset Computer''', at the '''"Clone Complete" '''…screen. (Computer should reboot - If not, Restart)<br>
 
<br>1. __Power up the computer, (if Desktop, use a '''USB keyboard''') and press '''F12 '''when F2 or F12 appears. <br>2. __Place an appropriate '''BartPE CD''', which is compatible with computer Model, into the CD drive tray. <br>3. __Select the '''CD-ROM '''drive to BOOT to BARTPE CD, which will <u>auto-map </u>to'''\\Hawk\ghost '''<br>4. __Click '''OK''', at the '''PE Network Configurator '''screen. <br>5. __Click '''OK''', at the '''About Symantec Ghost '''screen.<br>6. __Select '''Local''', then '''Disk''', then "'''From Image" '''at the '''Symantec Ghost '''…screen.<br>7. __Select '''‘Network Drive’ '''from <u>Look in</u>: pull-down menu on ‘'''Image file name to restore from’ '''..screen.<br>8. __Select the <u>correct folder </u>(i.e., __Desktops or __Laptops… etc) which contains the image for the computer Model.<br>9. __Select the <u>correct image </u>for the computer Model you are imaging. (Use arrow-down to read Image file description)<br>10. __Click '''OK''', at the '''Select local destination drive'''… screen.<br>11. __Click '''OK''', at the '''Destination drive Detail '''…screen.<br>12. __Click '''Yes''', at the question: – '''“Proceed with disk restore?” '''…screen. <br>13. __Click '''Reset Computer''', at the '''"Clone Complete" '''…screen. (Computer should reboot - If not, Restart)<br>
  
<u</u>
+
 
  
 
<u>'''Computer 'Configuration' Procedure'''</u>&nbsp;&nbsp;&nbsp;-&nbsp; (This is imbedded into Distribution Hepldesk tickets) &nbsp;&nbsp; (2/12/2009)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;  
 
<u>'''Computer 'Configuration' Procedure'''</u>&nbsp;&nbsp;&nbsp;-&nbsp; (This is imbedded into Distribution Hepldesk tickets) &nbsp;&nbsp; (2/12/2009)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;  
Line 21: Line 21:
 
<br><u>'''Installing Printers, Software, run ‘AssetTrckr’, &amp; update ‘BIOS’ - (while logged in as LIS)<br>'''</u>1.__ Launch '''“Add Bombay Printers”''' shortcut =&gt; (use Authorized Acct – midd\pcconfig)<br>2.__ Select a '''“Default printer”<br>'''3.__ Launch '''“Add Software HAWK Drop”''' shortcut =&gt; (use Authorized Acct – midd\pcconfig)<br>4.__ Launch '''“AssetTrckr ScanCmptr” '''shortcut =&gt; (use Authorized Acct – midd\pcconfig)<br>5.__ Launch “BIOS” shortcut =&gt; Launch latest ‘bios’.exe, =&gt; click Run but DON’T click Continue yet…<br>6.__ Delete the 5 ‘scripts’ shortcuts from the desktop, =&gt; then ‘Empty Recycle Bin’<br>7.__ On ‘Dell BIOS Flash’ screen, Click Continue if a ‘new’ BIOS is to be applied, if not click Cancel …<br>8.__ Re-Boot after Printers; Software; AssetTrkr; &amp; BIOS has all been installed.  
 
<br><u>'''Installing Printers, Software, run ‘AssetTrckr’, &amp; update ‘BIOS’ - (while logged in as LIS)<br>'''</u>1.__ Launch '''“Add Bombay Printers”''' shortcut =&gt; (use Authorized Acct – midd\pcconfig)<br>2.__ Select a '''“Default printer”<br>'''3.__ Launch '''“Add Software HAWK Drop”''' shortcut =&gt; (use Authorized Acct – midd\pcconfig)<br>4.__ Launch '''“AssetTrckr ScanCmptr” '''shortcut =&gt; (use Authorized Acct – midd\pcconfig)<br>5.__ Launch “BIOS” shortcut =&gt; Launch latest ‘bios’.exe, =&gt; click Run but DON’T click Continue yet…<br>6.__ Delete the 5 ‘scripts’ shortcuts from the desktop, =&gt; then ‘Empty Recycle Bin’<br>7.__ On ‘Dell BIOS Flash’ screen, Click Continue if a ‘new’ BIOS is to be applied, if not click Cancel …<br>8.__ Re-Boot after Printers; Software; AssetTrkr; &amp; BIOS has all been installed.  
  
<br><u>'''Log-on as Administrator to COPY 'LIS' profile to 'Default User' profile'''</u>'''<br>'''1.__ '''Log-on''' as <u>administrator </u>using '''Workstation only '''(desktops) <br>2.__ Launch '''System Properties '''(shortcut on desktop)<br>3.__ On '''Advanced '''tab, under User Profiles click on Settings button, then click to Highlight LIS profile.<br>4.__ Click '''Copy To''' button, =&gt; '''Browse '''to <u>C:\Documents and Settings</u>\<u>'''Default User'''</u>(highlighted) =&gt; '''OK'''<br>5.__ …Click Change button, click Location button, Cancel, click on ‘local computer’ under Location: =&gt; '''OK'''<br>6.__ Type '''<u>ev</u>'''eryone in box, click '''Check Names '''button, and <u>'''Everyone'''</u>will be recognized with an <u>underline</u>.... <br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ...YES =&gt; OK =&gt; OK<br>7.__ '''<u>Log-Off</u>'''as <u>administrator</u>, &amp; <u>'''Log-On'''</u>to the ‘'''MIDD’ '''domain using a <u>Domain User </u>Acct. <br>8.__ Launch Outlook - (to test Outlook auto-configuration)<br>9.__ Shutdown (config is done!) – Write the Users info (on blue tape), placed on the computer and laptop bag. <br>10__ Laptops: Put a network cable, USB mouse and the info folder into the laptop bag. <br>11__ Desktops: Use Monitor box to box-up computer, USB mouse &amp; keyboard, DVI “Y” &amp; Digital video cables, (2) power cords and Network cable.<br>11a__ Record the Display Monitor serial # in the Helpdesk ticket. <br>12¬__ Update the Heat ticket.<br>
+
<br><u>'''Log-on as Administrator to COPY 'LIS' profile to 'Default User' profile'''</u>'''<br>'''1.__ '''Log-on''' as <u>administrator </u>using '''Workstation only '''(desktops) <br>2.__ Launch '''System Properties '''(shortcut on desktop)<br>3.__ On '''Advanced '''tab, under User Profiles click on Settings button, then click to Highlight LIS profile.<br>4.__ Click '''Copy To''' button, =&gt; '''Browse '''to <u>C:\Documents and Settings</u>\<u>'''Default User'''</u>(highlighted) =&gt; '''OK'''<br>5.__ …Click Change button, click Location button, Cancel, click on ‘local computer’ under Location: =&gt; '''OK'''<br>6.__ Type '''<u>ev</u>'''eryone in box, click '''Check Names '''button, and <u>'''Everyone'''</u>will be recognized with an <u>underline</u>.... <br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ...YES =&gt; OK =&gt; OK<br>7.__ '''<u>Log-Off</u>'''as <u>administrator</u>, &amp; <u>'''Log-On'''</u>to the ‘'''MIDD’ '''domain using a <u>Domain User</u> Acct. <br>8.__ Launch '''Outlook '''- (to test Outlook auto-configuration)<br>9.__ Shutdown (config is done!) – Write the Users info (on blue tape), placed on the computer and laptop bag. <br>10__ Laptops: Put a network cable, USB mouse and the info folder into the laptop bag. <br>11__ Desktops: Use Monitor box to box-up computer, USB mouse &amp; keyboard, DVI “Y” &amp; Digital video cables, (2) power cords and Network cable.<br>11a__ Record the Display Monitor serial # in the Helpdesk ticket. <br>12¬__ Update the Heat ticket.<br>

Revision as of 16:13, 12 February 2009

'Imaging' Windows PC Computers using BartPE CD


1. __Power up the computer, (if Desktop, use a USB keyboard) and press F12 when F2 or F12 appears.
2. __Place an appropriate BartPE CD, which is compatible with computer Model, into the CD drive tray.
3. __Select the CD-ROM drive to BOOT to BARTPE CD, which will auto-map to\\Hawk\ghost
4. __Click OK, at the PE Network Configurator screen.
5. __Click OK, at the About Symantec Ghost screen.
6. __Select Local, then Disk, then "From Image" at the Symantec Ghost …screen.
7. __Select ‘Network Drive’ from Look in: pull-down menu on ‘Image file name to restore from’ ..screen.
8. __Select the correct folder (i.e., __Desktops or __Laptops… etc) which contains the image for the computer Model.
9. __Select the correct image for the computer Model you are imaging. (Use arrow-down to read Image file description)
10. __Click OK, at the Select local destination drive… screen.
11. __Click OK, at the Destination drive Detail …screen.
12. __Click Yes, at the question: – “Proceed with disk restore?” …screen.
13. __Click Reset Computer, at the "Clone Complete" …screen. (Computer should reboot - If not, Restart)


Computer 'Configuration' Procedure   -  (This is imbedded into Distribution Hepldesk tickets)    (2/12/2009)                 

                 NAME (person doing the config / & delivery):______________________________

(755 Desktops only) - Change the password for the Intel AMT
1.__ Turn on the computer
2.__ At the BIOS screen, press CTRL-P to enter the Intel AMT management console
3.__ Login using the default password: admin
4.__ Select change password from the menu and press enter
5.__ Type in the new password: (????)

6.__ Exit and restart computer and you are all set.


Configuring the computer using 'scripts' shortcuts – (left to right)
1.__ Login as LIS (lis1)
2.__ Click NO to restarting computer!
3.__ Id.txt file (on screen) - Fill-inthe Midd: ________
4.__ SAVE and Close the Id.txt file.
5.__ Launch Config.cmd - ['scripts' shortcut on desktop - bottom left]
6.__ Type the 'users' [username-midd] => OK   [this names the computer]
7.__ “Press any key to continue”… -- (Reboots)
8.__ Login as LIS (again) => “Press any key to continue”…-- (Reboots & will join the DOMAIN)
9.__ Login as LIS (again), => Cancel the Novell login screen.
10__ Enter in the 'users' [username] => OK - [adds user to Administrators Group]

11__ Ensure the correct People and Groups have been added to‘Administrators Group’.


Installing Printers, Software, run ‘AssetTrckr’, & update ‘BIOS’ - (while logged in as LIS)
1.__ Launch “Add Bombay Printers” shortcut => (use Authorized Acct – midd\pcconfig)
2.__ Select a “Default printer”
3.__ Launch “Add Software HAWK Drop” shortcut => (use Authorized Acct – midd\pcconfig)
4.__ Launch “AssetTrckr ScanCmptr” shortcut => (use Authorized Acct – midd\pcconfig)
5.__ Launch “BIOS” shortcut => Launch latest ‘bios’.exe, => click Run but DON’T click Continue yet…
6.__ Delete the 5 ‘scripts’ shortcuts from the desktop, => then ‘Empty Recycle Bin’
7.__ On ‘Dell BIOS Flash’ screen, Click Continue if a ‘new’ BIOS is to be applied, if not click Cancel …
8.__ Re-Boot after Printers; Software; AssetTrkr; & BIOS has all been installed.


Log-on as Administrator to COPY 'LIS' profile to 'Default User' profile
1.__ Log-on as administrator using Workstation only (desktops)
2.__ Launch System Properties (shortcut on desktop)
3.__ On Advanced tab, under User Profiles click on Settings button, then click to Highlight LIS profile.
4.__ Click Copy To button, => Browse to C:\Documents and Settings\Default User(highlighted) => OK
5.__ …Click Change button, click Location button, Cancel, click on ‘local computer’ under Location: => OK
6.__ Type everyone in box, click Check Names button, and Everyonewill be recognized with an underline....
           ...YES => OK => OK
7.__ Log-Offas administrator, & Log-Onto the ‘MIDD’ domain using a Domain User Acct.
8.__ Launch Outlook - (to test Outlook auto-configuration)
9.__ Shutdown (config is done!) – Write the Users info (on blue tape), placed on the computer and laptop bag.
10__ Laptops: Put a network cable, USB mouse and the info folder into the laptop bag.
11__ Desktops: Use Monitor box to box-up computer, USB mouse & keyboard, DVI “Y” & Digital video cables, (2) power cords and Network cable.
11a__ Record the Display Monitor serial # in the Helpdesk ticket.
12¬__ Update the Heat ticket.

Powered by MediaWiki