Connecting to File Servers
End User Guides
- Connect to File Servers with Windows by Mapping Network Drive
- Connect To File Servers with Mactintosh Using SMB
- Connect to File Servers from off campus using Netstorage
Connecting to file servers with Mac OS X
To connect to Tigercat, Classes, or other Novell servers with Mac OSX, you need to know their "SMB address" which is entered in the format of smb://server/vol1 as below.
- Tigercat: smb://tigercat/vol1/users
- Classes: smb://classes/vol1
- Snowleopard: smb://snowleopard/vol1
- Ocelot: smb://ocelot/vol1
Exceptions: don't use "/vol1" when connecting to these servers.
- Midd-Unix (aka Community): smb://midd-unix OR smb://community
- Muskrat: smb://muskrat
Connecting to File Servers in Windows Vista
The standard procedure of mapping a network drive to connect to file servers, does not work by default on Windows Vista. There are multiple ways around this.
With Novell client
The Novell client located in "\\Snowleopard\vol1\Software\Software-Windows\Novell Clients" is the recommended solution for computers that will stay ON campus almost all the time. (Off-campus, Novell cannot connect and users will have to go through the inconvenience of always logging in "Workstation Only".) You can access the install file by connecting to Snowleopard through Netstorage. Note that it is NOT recommended to download the Novell client from Novells website.
Registry fix to allow mapping network drive
The following configuration changes would allow the person to authenticate without using the Novell client. The issue is that by default, Vista requires the newer NTLMV2 protocol for authentication when attempting to map network drives. To allow NTLMv1 or LM challenge-response operations do the following:
- Vista Ultimate and Enterprise versions only - change the settings graphically:
- Control Panel -> System Maintenance -> Administrative Tools (run as administrator) -> Local Security Policies -> Local Policies -> Security Options
- Find the Policy Key named Network Security : LAN Manager Authentication Level
- Set the value to "Send LM and NTLM responses" or - and it seems to make the most sense -"Send LM & NTLM - use NTLMv2 session security if negotiated"
- Restart the computer. You can now connect to Novell Servers (such as Tigercat) as normal (if you dont know how to do that, see the last section of this document).
- All Vista versions - change the settings in the Windows registry:
Note: There have been some reports of the following solution not working, mostly on Vista Business.
- Run the registry editor and open this key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
- If it doesn't already exist, create a DWORD value named LmCompatibilityLevel
- Set the value to 1
- Restart the computer. You can now map a network drive to Novell Servers (such as Tigercat) as normal.
Connecting to the servers
To connect to these servers you need to know their addresses. Then follow the steps below.
- Tigercat: \\tigercat\vol1
- Classes: \\classes\vol1
- Snowleopard: \\snowleopard\vol1
- Click on the Start button and right-click on Computer.
- Click on Map network drive.
- In the Folder field enter the address of the server (e.g. \\tigercat\vol1\users )
- Click Connect using a different name.
- Enter your Middlebury username in this format: midd\yourusername and enter your college password.
- Click OK and then click Finish.
Connecting to Midd-Unix
Faulty, staff and student personal web pages are kept on Midd-Unix. You can connect to Midd-Unix while on the Middlebury campus or from off the campus.
Connect using the End User Guides as appropriate to your operating system.
- Open Internet Explorer
- In the address field type in: ftp://email@example.com (replace "yourusername" with your own username)
- Press "Enter" and you will be asked for your password, enter it and press "Log In"
- If the username and password was correct you will be connected to midd-unix and can start transferring/editing files.
Open Fetch, it should be in your "Applications" folder. If you do not have fetch you can call the Helpdesk and they can e-mail you a link and an install code.
When Fetch opens enter the following:
- Host: ftp.middlebury.edu
- UserID: yourusername
- password: yourpassword
Your folders on Midd-Unix should appear.
Mapping a Drive to a Novell Server without the Novell Client (PC)
It is possible to connect to a Novell server (such as Tigercat, Classes, Snowleopard etc.) and manage your files without installing the Novell Client. The advantage of this method is that you do not need to install any additional software (such as the Novell client) and the startup process of your computer is noticeably faster. The disadvantage is that you may need to provide your username and password each time you connect to the server.
- Right-click the "My Computer" icon and select "Map Network Drive"
- In the "Map Netowrk Drive" window, leave the "Drive" option as it is. In the "Folder" field, type in the server name and the shared folder name with slashes like so: \\tigercat\vol1 or \\classes\vol1 or \\snowleopard\vol1
- Ensure that the "Reconnect at logon" box is checked.
- Click "Finish"
- You will be asked for your username and password. For your username, type it in the format midd\myusername to indicate the user domain.
- If you get an error, double-check the server address to ensure that you spelled it correctly; also make sure that you types in your username with midd\ before it.
- The network address cannot be found or the network is not available: Ensure that the "TCP/IP NetBios Helper" service is running. ## Go to the Start menu -> Run ## type in "services.msc" and click OK ## In the Services Management Console look for "TCP/IP NetBios Helper", right-click it, select "Properties". ## In the Properties window that appears, use the drop-down menu in the middle to ensure that the "Startup Type" is set as "Automatic" and click apply ## click the button named "Start" inside the properties window.
- Your computer needs to have a unique name to connect to the network. ## Right-click "My Computer" and choose Properties ## Choose "Computer Name" tab and click the "Change" button ## Enter in a new name. Consider using your username and a one-word descriptor so that the name is unique, such as "pmitrevs-XP". The name can't be longer than around 11 characters. ## Click OK to close the dialogs and restart the computer immediately.
- Try downloading and running WinsockXP Fix: http://www.softpedia.com/get/Tweak/Network-Tweak/WinSockFix.shtml After running Winsock Fix, restart computer.
Tracking details: Author: P.M. Revised: 02/07/2008
Using File Servers
End user guides
- Using your Course folder
- Saving A File On A Server Using A PC
- Installing And Using The VPN Client On A Windows Computer
- Setting Your Passwords On Middlebury College Computer Systems
- Determining Your Quota On A Novell Server
Classes server: "Dropbox" folder behavior
Teachers of a class can see all contents of the Dropbox folder. Students cannot see any of the folder's contents, however they can drag files there (ie they have write privilege, but it's limited because they have no read privilege).
Students SHOULD NOT TRY TO SAVE documents directly to \\Classes\Dropbox. They should save the file elsewhere first, and then drag the file to the Dropbox folder.
The Dropbox folder is a safe place for teachers of a class to securely share files with each other so that non-teachers cannot access the files.
Default Server Quotas - Email, Novell, and Midd-Unix
|500 MB||1000 MB (1 GB)|
|Tigercat||200 MB||200 MB|
|Classes||300 MB/class||300 MB/class|
|Midd-Unix||50 MB||50 MB|
- Petar Mitrevski Revised: 4/7/2008
Other Problems & Questions
Recovering a File Deleted from a Server (Mac or PC)
It is possible to recover a file that has been deleted from one of the Novell servers (Tigercat, Classes, Snowleopard etc.). PC users that have the Novell Client installed should follow the instructions available on this web page (or search the keywords: recover file from server). PC users that do not have Novell, as well as Macintosh users can login to NetStorage (http://go.middlebury.edu/netstorage) and recover the deleted file(s) using a web browser. For more information on how to login to NetStorage and see the deleted files, see this article(or search the keyword: netstorage)
Tracking details: Author: P.M. Revised: 02/07/2008
Student's Documents Don't Appear in the Dropbox on Classes
Professor cannot see a student's documents when he puts them in the Dropbox of the Classes folder (SPAN0220F). The last time his student submitted something that didn't show up, he told him to e-mail him the document, and he would manually place it in the folder. When he did so, it said there was all ready something there; however, it's not visible. It's only for one of his students.
Upgrading Novell client fixed it. Author: Linda Knutson Date: November 16, 2007
Mac OS X 10.5 (leopard) can't see any files inside a folder stored on a Novell server (like classes)
Problem: Mac OS X 10.5 (leopard) can't see any files inside a folder stored on a Novell server (like classes). PC/Windows computers or 10.4 (tiger) can see the files.
Solution: On a PC, using netstorage, or on a Mac with 10.4, check for files with non-roman characters (accented, symbols) - replace these characters with roman characters.
Second solution: On a PC, using netstorage, or on a Mac with 10.4, check if the parent folder, or the folder affected, end with a space in the file name. Remove the space, disconnect from the server, then reconnect.
Mac OS X freezes for a brief period after disconnecting from the network
This commonly occurs when the computer is connected to a file server (Tigercat, Classes, etc.) and loses network connection (the network cable is unplugged, or the computer goes to sleep, or the server/network is temporarily unavailable).
The solution is to disconnect from any connected file servers before closing the lid, putting the computer to sleep, disconnecting the cable or any other action that may terminate the network connection.
To disconnect from a connected server, open the Finder and click on the eject button next to the server name in the Finder's side bar (located on the left). Another way to disconnect from a server is to view your Desktop and find the server's icon on the desktop. Click on the icon once and from the "File" menu in the top left corner of the screen, select "Eject".
Sending Large Files
There are several free services that let you send large files:
www.YouSendIt.com - 100 MB maximum
www.send6.com - No size limit - 6 files maximum
www.datataxi.com - 500 MB maximum
However we do not and cannot guarantee the quality or security of the above-mentioned services.
Faculty, staff and students are allocated 50 MB of personal space on Middlebury's community web-server. Here are instructions on how to place a file on this web server: http://www.middlebury.edu/academics/lis/help/helpdesk/documentation/network/file/cross/network_ftp_2middunix.htm After a file is placed on the server, it can be access using any web browser on the following link: http://community.middlebury.edu/~username/file-name.ext where the word "username" is the username of the person who uploaded the file, and the word "file-name.ext" is the name and extension of the file. You can then send the link to the person needing the uploaded file and the person can easily download it.
For faculty working on projects with collegues from other institutions, it might be possible to create an FTP account where the files can be uploaded and the login username and password can be shared. The network administrators at Middlebury or the other institution should be able to help with this.
Tracking details: Author: Petar Mitrevski Revised: 12/18/2007
You can also upload your files to an online free storage provider, which in turn will provide you with a link your files. You can send this link to other people to view and download your files.
One of these services is: www.4shared.com (5.00 GB free Space, 100 Mb maximum per file)
However we do not and cannot guarantee the quality or security of the above-mentioned services. Tracking details: Author: Isaac Sadaqah Date: 10/12/2008
Connecting to the RHINO server with a Mac
Before connecting to the server called RHINO using a Mac, you should follow Apple's instructions here: http://support.apple.com/kb/TS1564