Middlebury

Difference between revisions of "Mbh303"

 
Line 5: Line 5:
 
In this room you can project from a laptop and watch a DVD and VHS Video.
 
In this room you can project from a laptop and watch a DVD and VHS Video.
  
'''Turning on Equipment''' - You will need to pull the screen down on the wall behind the lectern manually. Push the “Proj. On” button to turn on the projector.
+
'''Turning on Equipment''' - You will need to pull the screen down on the wall behind the lectern manually. Push the “Display On” button to turn on the projector.
  
'''Watching a DVD or VHS''' - Select the DVD/VCR button on the button panel. You will need to push the power button on the device, you can also do this with the remote. On the DVD/VCR player screen there will be an icon indicating which setting it is on, DVD or VCR. If it is not on the correct setting, push the DVD/VCR button. You can also do this from the remote. PLEASE NOTE!!! Do not push the DVD door closed. Doing this strips the gears and eventually breaks the device. Use the Open/Close button. You can control the room volume from the button panel with the volume dial.
+
'''Help''' - If you have problems at any time, you can press the Help? button, this will give you the number to the Helpdesk. A phone is available near to the podium.
  
'''Projecting from a Laptop''' - Select Laptop button. Connect VGA cable to your computer and plug the 3.5 Audio cable into the headphone jack if needed. If you have a Mac you will need to the appropriate adapter (dongle) You should have projection, if you do not have projection or the image is cropped, see the Troubleshooting section of this document.
+
'''Projecting from USB-C''' - Press the USB-C button on the control box. Connect the USB-C cable to your laptop. Turn your computer on. You should have projection. If you do not have projection go to the Troubleshooting section of this document.
 +
 
 +
'''Projecting from HDMI''' - Press the HDMI button on the control box.. Connect the HDMI cable to your laptop. Turn your computer on. You should have projection. If you do not have projection go to the Troubleshooting section of this document.
 +
 
 +
'''Watching a Blu-ray or DVD''' - Press the Blu-ray button on the control box.  Insert your disk and press play. You can control the Blu-ray player from the touch panel. It will play, stop, fast forward, rewind, skip forward, skip back, pause, and eject.
 +
 
 +
'''Audio''' - You can adjust volume using the knob on the control box. 
 +
 
 +
'''Projection Mute''' -At anytime you an temporarily turn on/off the projected image by pushing the MUTE button on the control box.
 +
 
 +
'''Turning System Off''' - Press the display button OFF on the control box. 
  
 
'''Please remember to turn the system off when you are finished.'''
 
'''Please remember to turn the system off when you are finished.'''
  
For troubleshooting tips go to [[Projecting_from_your_Laptop_Computer#What_to_do_if_Your_Computer_doesn.27t_project|go/troubleshoot]].
+
'''For troubleshooting tips go to [[Projecting from your Laptop Computer#What%20to%20do%20if%20Your%20Computer%20doesn.27t%20project|go/troubleshoot]]'''.

Latest revision as of 08:27, 22 April 2022

Spherical Image - RICOH THETA

MBH 303 Generic Laboratory-Classroom Instructions

In this room you can project from a laptop and watch a DVD and VHS Video.

Turning on Equipment - You will need to pull the screen down on the wall behind the lectern manually. Push the “Display On” button to turn on the projector.

Help - If you have problems at any time, you can press the Help? button, this will give you the number to the Helpdesk. A phone is available near to the podium.

Projecting from USB-C - Press the USB-C button on the control box. Connect the USB-C cable to your laptop. Turn your computer on. You should have projection. If you do not have projection go to the Troubleshooting section of this document.

Projecting from HDMI - Press the HDMI button on the control box.. Connect the HDMI cable to your laptop. Turn your computer on. You should have projection. If you do not have projection go to the Troubleshooting section of this document.

Watching a Blu-ray or DVD - Press the Blu-ray button on the control box. Insert your disk and press play. You can control the Blu-ray player from the touch panel. It will play, stop, fast forward, rewind, skip forward, skip back, pause, and eject.

Audio - You can adjust volume using the knob on the control box.

Projection Mute -At anytime you an temporarily turn on/off the projected image by pushing the MUTE button on the control box.

Turning System Off - Press the display button OFF on the control box.

Please remember to turn the system off when you are finished.

For troubleshooting tips go to go/troubleshoot.

Powered by MediaWiki