Music processing

This page contains information for local processing of Music Library materials.

<< Go to the Music Library page

Music scores

Sewing/Binding

Score binding

• Scores that need binding are on the priority labeling or labeling and repairs shelves. This process is for single-signature scores only. Do not bind items on the Bridgeport shelf.
• The blue slip in the score indicates what size spine wrap binder to use.

1. Carefully remove all staples from score with knife and discard.
2. Place score in binder, equidistant from top and bottom edges. Using an awl, punch a hole through the middle of the score's spine, and through the binder.
3. Punch 4 more holes, equidistant from edges, on either side of the center hole (5 in all; 3 for miniature scores less than 24.5 cm). (It may be necessary to re-punch the holes in the binder for ease of sewing. The top and bottom holes should be between 1/2" and 3/4" from the edge of the score itself.)
4. Prepare a threaded needle tied with a double knot (double thickness thread; roughly three arms' lengths for 10"x13" and 9"x12" binders.)
5. Starting with the needle facing down (if holes are numbered top-to-bottom 1,2,3,4,5)
   1. Down 3
   2. Up 5
   3. Down 3
   4. Up 4
   5. Down 3
   6. Up 1
   7. Down 3
   8. Up 2
   9. Down 3
6. Tie off center knot at the back of the binder with at least a double knot.
7. Add security strip per instructions.
8. Cover with spine wrap.

• For parts

1. Using manila folders, cut to fit size of parts (ensuring that they fit into the pocket.)
2. Sew parts following instructions for scores.
3. As of January, 2010: Parts are NOT barcoded separately.
4. Copy the call number exactly as it appears in the cataloger's mark (left front corner of manila folder), and add the appropriate part abbreviation.
5. Parts do not get security strips.

Call number label creation

P&P students and staff create call number labels according to these instructions: Producing labels

Labeling

• Labels

Always ensure label matches cataloger's mark on inside back page of score or book!
Labels should go on the spine if there is room. If not, on the lower left hand corner of the cover.
Add the MusLib prefix above all score call numbers! Check the cataloger's mark or note to ensure correct prefix.
Seal with the iron.
Remove "score" in the volume field of a score label (if present).

Music prefixes	MusLib	MusLib	MusLib	MusLib
e.g.	Ref	Oversize	Mini	DVD

• Stamping

Stamp each title page once with the large "Middlebury College Music Library" stamp, including title pages for parts.
Use the thin "Middlebury C.M.L." stamp to stamp twice along the top margin of two pages inside the score or book.
If the item is thick enough, stamp along the top, bottom, and side edges.

• Security strip

Security strips must be added per instructions.

• Reference scores

Reference scores marked "Lib use only" status get the stamp "Not to be taken from the library" next to the cataloger's mark.

• Standing order scores (with hard covers)

Standing order scores with "Lib use only" status get the stamp "Not to be taken from the library" next to the cataloger's mark.

• Discs in back pockets

For books or scores accompanied by discs (CDs or DVDs), attach a disc sleeve to inside back cover of binder.
Label the disc with the same call number that appears on the score or book.

• Misc. other notes

For hand-typed spine labels, please ensure se-lin binding tape gets covered with clear protective polyester tape before ironing.

Music DVDs

For all material types, a cataloger will indicate in a note on the binding slip any necessary special treatment or instructions for handling unique items.

DVD labeling

1. On the DVD itself, write "Middlebury College Library" around the center ring of the disc using archival marking pen (or silver/gold pen for dark label discs.)
2. For plastic DVD cases:
   1. Remove the paper cover sleeve from the DVD case and attach an adhesive spine label on the bottom of the spine (do not use a se-lin spine label, do not use polyester tape, since label is already protected by the clear plastic case.)
   2. Apply security strip per instructions.
3. For paper DVD cases:
   1. Use iron-on se-lin spine labels and polyester tape (as for a score.)
   2. Apply security strip per instructions.

• Place finished items on the Circ. supervisor's desk.

Music CDs

For all material types, a cataloger will indicate in a note on the binding slip any necessary special treatment or instructions for handling unique items.

Call number label creation

1. Load label paper in printer (face down for LIB135)
   
2. Download and open these files: CD label spreadsheet and CD label doc
3. Enter current label number in the spreadsheet and click enter or hit return and the rest of the spreadsheet will fill in the consecutive numbers. Save and close the spreadsheet.
4. In the document, click Mailings tab, then click Finish & Merge, and Print Documents, and in Print records, select all.
   

(For remarking older items use the Avery template 8460 and hand type misc. numbers as needed.  Place sheet in printer facing up, with top of sheet feeding into printer.)

CD labeling

1. Place the call number label on the bottom of the spine (reading from top down on left-hand side as viewed from front cover). Place directly on the paper label, inside the jewel case. If applying to a paper case, cover with special tape to protect label.
2. On the CD itself, write "Music Library" and "CD XXXXX" around the center ring with archival marking pen (silver/gold marking pen for black labels.) For multiple-disc items, label each disc. (Do not add d.1, d.2, etc. to the end of call numbers unless instructed.)
3. Install security strip per instructions.
   
4. Send to Music Library in bin.  Place a rubber band around multiple CDs to reduce shifting in transit, preventing damage.
   

MCDs (locally-produced CDs of student and visiting artist performances)

1. MCDs require a hand-typed call number "MCD 0222", "MCD 0223", etc.
2. MCDs require creation of a paper backing. The spine label and security strip will be attached to the paper backing.
3. For MCD (local CDs) only: Add a "Library Use Only" sticker on the front cover.

Other resources

Prioritizing work

1. Priority labeling shelf (Can go straight to Circ. supervisor's desk when finished.)
2. Priority cataloging shelf (Items that have call numbers, back to Priority cataloging shelf.)
3. Labels pending shelf (If labels have arrived from the Davis Family Library.) These go to Circ. supervisor when labeled. Remember, these items show as "available" in the catalog so it's important to get them out on the shelves as soon as possible so circ. staff and patrons can find them.
4. Labeling and repairs shelf. CDs and DVDs from here can go to Circ. supervisor. Scores from this shelf may still need barcodes added and labels ordered.
5. CDs at the end of the backlog and in the No copy shelves. These go back to the backlog or No copy shelves, filed in call number order.

Bridgeport Binding with LARS

1. Click on the icon on the desktop.
2. Type “ML” as ID (no password needed.)
3. Click Jobs, Click New.
4. In LARS job space, type month and day to ship, along with MUSC (i.e. XXXXMUSC)
5. Account = 75803, then click OK.
6. Uncheck automatic binding tickets, click OK.
7. In the ticket enter Type = B and Title style = B (this is the same for all items.)
8. Foil = Type (on slip) = what color the writing will be
9. Material = Color (on slip) = what color the cover will be
10. Tab through these if there is nothing indicated on the slip (W, for white, and NC, for no choice, are the defaults.)
11. In the Title text type Name \\ Title. Unless no name, then just Title.
12. Tab through until you get to Binding button and hit Enter.
13. Tab down and enter “Y” for each of the preset options you’d like (i.e. Recase, Bind covers, Make pocket, etc.)
14. Tab over to enter special instructions in the “One time instructions” box (i.e. Bind parts in pocket, Tip in loose pages, etc.)
15. Clicking Enter will save the Binding instructions and bring you back to the ticket.
16. Tab over and click Save to go to the next ticket (If you make a mistake click on the Update radio button, and enter the ticket # of the item you wish to change. Click Save. Update others, or click Add to create new tickets.)
17. When finished, go to the main menu and click Refresh. Then click Reports, and Batch bind tickets. Enter ticket paper face down, with the top at the front of the drawer. Print.
18. After printing select the job in the start menu and click the Close button.

Place ticket between cover and first page. Place two rubber bands around each score (1 vertical, 1 horizontal). Send to J. in P&P (in bin or box labeled P&P).

Binding Colors

This is a reference for catalogers to use when creating binding slips. Please update as needed when Bridgeport makes changes to its standard stock of binding colors.

Title/Composer	Jacket Color	Lettering Color
Beethoven	563	B
Bruckner	563	B
Byrd	192	G
Chopin	490	W
Crecquillon	182	G
Fayrfax	860	W
Gabrieli	588	W
Gonzaga Masses	860	W
Josquin	598	W
Lasso	490	W
Lheritier	860	B
Mahler	860	W
Marenzio	478	B
Merulo	188	W
MMEspan.	182	W
MUSA	478	W
Musica Britannica	943	W
Obrecht	490	W
Ockeghem-Masses	630	B
Purcell	598	W
Rossi	588	W
RR American	478	W
RR Baroque	798	W
RR Classical	370	B
RR Medieval	290	W
RR Mid. & Ear. Ren	290	W
RR 19th & early 20th	192	W
RR Oral trad.	490	G
RR Renaissance	370	B
Regnart	188	W
Scarlatti Sonatas	943	B
SCI Journal	370	B
Use of Salisbury	180	G
Vivaldi	NONE
Wolf	490	W

Lettering: W=White B=Black G=Gold

External binding guidelines

Music Library Association's guidelines for music pamphlet binding.