Middlebury

Difference between revisions of "Network Troubleshooting - Mac OS X"

m (Added to category "Helpdesk")
 
(45 intermediate revisions by 5 users not shown)
Line 1: Line 1:
[[Category:Helpdesk]]
+
<br>
==Typical troubleshooting steps==
+
 
 +
{| border="1" align="center" style="background: rgb(255, 222, 173) none repeat scroll 0% 0%; -moz-background-clip: -moz-initial; -moz-background-origin: -moz-initial; -moz-background-inline-policy: -moz-initial;"
 +
|+ '''= &gt;&gt; Information that we must have in a ticket &lt;&lt;= '''
 +
|-
 +
|
 +
*'''Name and location (building, room #)'''. Make sure we have their '''extension or cell #'''.
 +
*'''Jack ID''' (it’s on a silver or white tag around or ON the jack, e.g. "A-0-12").
 +
*'''IP address''', '''''<i>MAC address '''and '''</i>'''the result of running the "arp -a" command'''.
 +
 
 +
|}
 +
 
 +
<br>
 +
 
 +
== Typical troubleshooting steps ==
 +
 
 
Typical troubleshooting steps on Macs include three main approaches:
 
Typical troubleshooting steps on Macs include three main approaches:
* Renewing the IP address
 
* Turning the network card off and on again
 
* Creating a new location, getting the IP, MAC address and running “arp -a".
 
  
====Release and renew DHCP lease (renew IP address)====
+
*Renewing the IP address
# Open System Preferences => Network.  
+
*Turning the network card off and on again
# For '''Tiger''': Click on the menu next to “Show” and select “Built-in Ethernet”. For '''Leopard''': Click on “Ethernet” in the list on the left, then click the button “Advanced” in the lower right corner.  
+
*Creating a new location, getting the IP, MAC address and running “arp -a".
# Under the “TCP/IP” tab click the button “Renew DHCP Lease”. '''Click the button “Apply”''' (located in lower right corner).
+
 
 +
'''IMPORTANT:'''
 +
 
 +
*You '''will''' need to obtain the OS version. See [https://mediawiki.middlebury.edu/wiki/LIS/Network_Troubleshooting_-_Mac_OS_X#_note-ftn2 the footnote] for that.
 +
*If you need to create a ticket for someone else to work on this, there is some [https://mediawiki.middlebury.edu/wiki/LIS/Network_Troubleshooting_-_Mac_OS_X#Information_that_we_must_have_in_a_ticket information that we must have].
 +
 
 +
==== Release and renew DHCP lease (renew IP address) ====
 +
 
 +
#Click on the Apple logo (top left corner), click System Preferences. In the window that appears click Network.
 +
#For '''Tiger''': Click on the menu next to “Show” and select “Built-in Ethernet”. For '''Leopard, Snow Leopard, Lion,''' and '''Yosemite''': Click on “Ethernet” in the list on the left, then click the button “Advanced” in the lower right corner.
 +
#Under the “TCP/IP” tab click the button “Renew DHCP Lease”. '''Click the button “Apply”''' (located in lower right corner).
 +
#Try opening the midd homepage now. Didn't help? See the section below.
 +
 
 +
==== Create a new location ====
 +
 
 +
#Open System Preferences =&gt; Network.
 +
#Click on the menu next to “Location”.
 +
#For '''Tiger''': Select “New Location”. For '''Leopard, Lion,''' and '''Yosemite''': Select “Edit Locations”, then click on the plus “+” button.
 +
#Type in any name for the new location (e.g. Middlebury), click OK or Done. '''Click the button “Apply”''' (located in lower right corner).
 +
#'''Creating a new location changes all network settings to their defaults (automatically obtain an IP, no proxy servers, no manual DNS servers, etc.). It also saves the customer’s custom settings.'''
 +
#Try opening the midd homepage now. Didn't help? See section below.
  
====Create a new location====
+
==== Disable and re-enable the Network Card (NIC) ====
# Open System Preferences => Network.
 
# Click on the menu next to “Location”.
 
# For '''Tiger''': Select “New Location”. For '''Leopard''': Select “Edit Locations”, then click on the plus “+” button.
 
# Type in any name for the new location (e.g. Middlebury), click OK or Done. '''Click the button “Apply”''' (located in lower right corner).
 
# '''Creating a new location changes all network settings to their defaults (automatically obtain an IP, no proxy servers, no manual DNS servers, etc.). It also saves the customer’s custom settings.'''
 
  
====Disable and re-enable the Network Card (NIC)====
 
 
For '''Tiger''':
 
For '''Tiger''':
# Open System Preferences => Network.
 
# Click on the menu next to “Show” and select “Network Port Configurations”. In the list of ports:
 
# To '''disable''' the NIC, '''remove''' the checkmark next to “Built-in Ethernet”. '''Click the button “Apply Now”''' (located in lower right corner).
 
# Wait 5 seconds, then '''enable''' the NIC, by '''placing''' a checkmark next to “Built-in Ethernet”'''. Click the button “Apply Now”''' (lower right corner).
 
  
For '''Leopard''':  
+
#Open System Preferences =&gt; Network.
# Open System Preferences => Network.
+
#Click on the menu next to “Show” and select “Network Port Configurations”. In the list of ports:
# Click on “Ethernet” in the list on the left. Click on the gear button [[Image:]] (it’s below the list on the left).  
+
#To '''disable''' the NIC, '''remove''' the checkmark next to “Built-in Ethernet”. '''Click the button “Apply Now”''' (located in lower right corner).
# To disable the NIC, elect “Make Service Inactive”. Click the button '''“Apply”'''.  
+
#Wait 5 seconds, then '''enable''' the NIC, by '''placing''' a checkmark next to “Built-in Ethernet”'''. Click the button “Apply Now”''' (lower right corner).
# Wait 5 seconds, then enable the NIC by clicking on the gear button again and selecting “Make Service Active” this time. Click the button '''“Apply”.'''
+
 
 +
For '''Leopard, Lion,''' and '''Yosemite''':
 +
 
 +
#Open System Preferences =&gt; Network.
 +
#Click on “Ethernet” in the list on the left. Click on the gear button (it’s below the list on the left).
 +
#To disable the NIC, elect “Make Service Inactive”. Click the button '''“Apply”'''.
 +
#Wait 5 seconds, then enable the NIC by clicking on the gear button again and selecting “Make Service Active” this time. Click the button '''“Apply”.'''
 +
 
 +
==== Getting the IP address and MAC address and running "arp -a"  ====
  
====Getting the IP address and MAC address and running "arp -a"====
 
 
To get the IP address and MAC address:
 
To get the IP address and MAC address:
# Open System Preferences => Network.
 
# For Tiger: Click on the menu next to “Show” and select “Built-in Ethernet”. For Leopard: Select “Ethernet” in the list on the left and click “Advanced”.
 
# Under the TCP/IP tab, record the IP address (if it’s blank, leave a note saying that it’s blank).
 
# Under the Ethernet tab record the Ethernet ID (this is the MAC address).
 
  
Arp is a Unix command used to identify network-connected computers, routers, etc. To run "arp -a":  
+
#Open System Preferences =&gt; Network.
# Open Macintosh HD => Applications => Utilities. Find “Terminal” and double-click it.
+
#For '''Tiger''': Click on the menu next to “Show” and select “Built-in Ethernet”. For '''Leopard, Lion,''' and '''Yosemite''': Select “Ethernet” in the list on the left and click “Advanced”.
# Type in arp -a
+
#Under the TCP/IP tab, record the IP address (if it’s blank, leave a note saying that it’s blank).
# Press enter (or return) on the keyboard.
+
#For '''Tiger''': Under the Ethernet tab record the Ethernet ID (this is the MAC address). For '''Lion''' and '''Yosemite''': the MAC address will be under the "Hardware" tab.
# Record the result. This will give the IP address and MAC address of the router, and may be used by SR or LNS to determine if there’s a Rogue DHCP server in the customer’s building.
 
  
==Other troubleshooting steps==
+
Arp is a Unix command used to identify network-connected computers, routers, etc. To run "arp -a":
# Find out what’s the OS<ref name="ftn2"><sup>Find OS version: Click on apple logo in top left corner of screen, select “About this Mac” and look in middle of the pop-up.</sup></ref>. E.g. Tiger (10.4) or Leopard (10.5). Older OSs can be troubleshooted like Tiger.
+
 
# Find the status of the NIC: Open System Preferences => Network. '''NOTE''': In 10.4 you need to select “Network Status” from the 2<sup>nd</sup> drop-down menu to be able to look at the status of the NIC. In 10.5 the status is displayed when you select “Ethernet” from the list on the left.  
+
#Open Macintosh HD =&gt; Applications =&gt; Utilities. Find “Terminal” and double-click it.
## '''<nowiki>“Built-in Ethernet is currently active and has the IP address [see list of IPs below]</nowiki>'''Possible causes: Should have a live connection. If the customer still cannot access the internet, there may be a proxy server, manually entered DNS address or a 3<sup>rd</sup> party firewall. Solutions: Quit and re-open browser. Try visiting [http://www.middlebury.edu/ www.middlebury.edu] (if the registration page appears, register the computer). Renew lease. Create a new location. Disable NIC / enable NIC. Try different browser. Reboot. Disable 3<sup>rd</sup> party firewalls (they are rare on Macs but do exist, e.g. Little Snitch, NetBarrier, Norton etc.). Invite customer to LIB202.
+
#Type in arp -a
## '''“Built-in Ethernet is currently active but has a self-assigned IP address”''' OR'''“The cable for Built-in Ethernet is connected but your computer does not have an IP”'''Possible causes: The computer detected a cable, a jack, and some connection, however, it cannot talk to the DHCP server. Loose cable. Bad cable. Bad card.Solutions: Ensure that the cable is firmly plugged into the network card and a live jack. Create a new location. Try a different jack. Try a different cable. Reboot. Invite customer to LIB202.  
+
#Press enter (or return) on the keyboard.
## '''“The cable for Built-in Ethernet is not plugged in”'''Possible causes: The cable may be unplugged/loose on one end. The cable may be bad. The network card may have failed. Solutions: Ensure that the cable is firmly plugged into the network card and a live jack. Create a new location. Try a different jack. Try a different cable. Reboot. Invite customer to LIB202.
+
#Record the result. This will give the IP address and MAC address of the router, and may be used by SR or LNS to determine if there’s a Rogue DHCP server in the customer’s building.
# Check the IP address. Refer to [[Network Troubleshooting]] to see what various IP addresses can tell you.
+
 
 +
Another way for checking the IP and MAC address: Click on apple logo (upper left corner) =&gt; "About this Mac"=&gt; "More Info" =&gt; (for Lion and Yosemite) "System Report" =&gt; "Network" =&gt; "Ethernet". (Shows both IP and MAC address). Note: on Yosemite, there is no "More Info" tab.
 +
 
 +
== Other troubleshooting steps ==
 +
 
 +
#Find out what’s the OS<ref name="ftn2">&lt;sup&gt;Find OS version: Click on apple logo in top left corner of screen, select "About this Mac" and look in middle of the pop-up.&lt;/sup&gt;</ref>. E.g. Tiger (10.4), Leopard (10.5), Lion (10.7), Yosemite (10.10). Older OSs can be troubleshot like Tiger.
 +
#Find the status of the NIC: Open System Preferences =&gt; Network. '''NOTE''': In 10.4 you need to select "Network Status" from the 2<sup>nd</sup> drop-down menu to be able to look at the status of the NIC. In 10.5 the status is displayed when you select "Ethernet" from the list on the left.
 +
##'''
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
<nowiki>"Built-in Ethernet is currently active and has the IP address [see list of IPs below]"</nowiki> '''Possible causes: Should have a live connection. If the customer still cannot access the internet, there may be a proxy server, manually entered DNS address or a 3<sup>rd</sup> party firewall. Solutions: Quit and re-open browser. Try visiting [http://www.middlebury.edu/ www.middlebury.edu] (if the registration page appears, register the computer). Renew lease. Create a new location. Disable NIC / enable NIC. Try different browser. Reboot. Disable 3<sup>rd</sup> party firewalls (they are rare on Macs but do exist, e.g. Little Snitch, NetBarrier, Norton etc.). Invite customer to LIB202.
 +
##'''"Built-in Ethernet is currently active but has a self-assigned IP address"''' OR'''"The cable for Built-in Ethernet is connected but your computer does not have an IP"'''Possible causes: The computer detected a cable, a jack, and some connection, however, it cannot talk to the DHCP server. Loose cable. Bad cable. Bad card.Solutions: Ensure that the cable is firmly plugged into the network card and a live jack. Create a new location. Try a different jack. Try a different cable. Reboot. Invite customer to LIB202.
 +
##'''"The cable for Built-in Ethernet is not plugged in"'''Possible causes: The cable may be unplugged/loose on one end. The cable may be bad. The network card may have failed. Solutions: Ensure that the cable is firmly plugged into the network card and a live jack. Create a new location. Try a different jack. Try a different cable. Reboot. Invite customer to LIB202.
 +
#Check the IP address. Refer to [[Network Troubleshooting]] to see what various IP addresses can tell you.
 +
 
 +
== Information that we must have in a ticket ==
  
 
If you still haven’t resolved the issue, get some information from the customer and create a ticket:
 
If you still haven’t resolved the issue, get some information from the customer and create a ticket:
* Name and location (building, room #). Make sure we have their extension or cell #.
 
* Jack ID (it’s on a silver or white tag around or ON the jack, e.g. “A-0-12”).
 
* Open System Preferences => Network. In
 
* IP address, MAC address and the result of running the “arp -a" command.
 
  
 +
*'''Name and location (building, room #)'''. Make sure we have their '''extension or cell #'''.
 +
*'''Jack ID''' (it’s on a silver or white tag around or ON the jack, e.g. "A-0-12").
 +
*'''IP address''', '''''<i>MAC address '''and '''</i>'''the result of running the "arp -a" command'''.
 +
 +
<br>
  
 
----
 
----
<references/>
+
 
 +
<references />
 +
 
 +
[[Category:Helpdesk]]
 +
[[Category:Network]]
 +
[[Category:Troubleshooting]]
 +
[[Category:OS X]]
 +
[[Category:Mac]]
 +
[[Category:Helpdesk Documentation]]
 +
[[Category:Public Search]]

Latest revision as of 09:19, 17 June 2015


= >> Information that we must have in a ticket <<=
  • Name and location (building, room #). Make sure we have their extension or cell #.
  • Jack ID (it’s on a silver or white tag around or ON the jack, e.g. "A-0-12").
  • 'IP address, MAC address and the result of running the "arp -a" command.


Typical troubleshooting steps

Typical troubleshooting steps on Macs include three main approaches:

  • Renewing the IP address
  • Turning the network card off and on again
  • Creating a new location, getting the IP, MAC address and running “arp -a".

IMPORTANT:

Release and renew DHCP lease (renew IP address)

  1. Click on the Apple logo (top left corner), click System Preferences. In the window that appears click Network.
  2. For Tiger: Click on the menu next to “Show” and select “Built-in Ethernet”. For Leopard, Snow Leopard, Lion, and Yosemite: Click on “Ethernet” in the list on the left, then click the button “Advanced” in the lower right corner.
  3. Under the “TCP/IP” tab click the button “Renew DHCP Lease”. Click the button “Apply” (located in lower right corner).
  4. Try opening the midd homepage now. Didn't help? See the section below.

Create a new location

  1. Open System Preferences => Network.
  2. Click on the menu next to “Location”.
  3. For Tiger: Select “New Location”. For Leopard, Lion, and Yosemite: Select “Edit Locations”, then click on the plus “+” button.
  4. Type in any name for the new location (e.g. Middlebury), click OK or Done. Click the button “Apply” (located in lower right corner).
  5. Creating a new location changes all network settings to their defaults (automatically obtain an IP, no proxy servers, no manual DNS servers, etc.). It also saves the customer’s custom settings.
  6. Try opening the midd homepage now. Didn't help? See section below.

Disable and re-enable the Network Card (NIC)

For Tiger:

  1. Open System Preferences => Network.
  2. Click on the menu next to “Show” and select “Network Port Configurations”. In the list of ports:
  3. To disable the NIC, remove the checkmark next to “Built-in Ethernet”. Click the button “Apply Now” (located in lower right corner).
  4. Wait 5 seconds, then enable the NIC, by placing a checkmark next to “Built-in Ethernet”. Click the button “Apply Now” (lower right corner).

For Leopard, Lion, and Yosemite:

  1. Open System Preferences => Network.
  2. Click on “Ethernet” in the list on the left. Click on the gear button (it’s below the list on the left).
  3. To disable the NIC, elect “Make Service Inactive”. Click the button “Apply”.
  4. Wait 5 seconds, then enable the NIC by clicking on the gear button again and selecting “Make Service Active” this time. Click the button “Apply”.

Getting the IP address and MAC address and running "arp -a"

To get the IP address and MAC address:

  1. Open System Preferences => Network.
  2. For Tiger: Click on the menu next to “Show” and select “Built-in Ethernet”. For Leopard, Lion, and Yosemite: Select “Ethernet” in the list on the left and click “Advanced”.
  3. Under the TCP/IP tab, record the IP address (if it’s blank, leave a note saying that it’s blank).
  4. For Tiger: Under the Ethernet tab record the Ethernet ID (this is the MAC address). For Lion and Yosemite: the MAC address will be under the "Hardware" tab.

Arp is a Unix command used to identify network-connected computers, routers, etc. To run "arp -a":

  1. Open Macintosh HD => Applications => Utilities. Find “Terminal” and double-click it.
  2. Type in arp -a
  3. Press enter (or return) on the keyboard.
  4. Record the result. This will give the IP address and MAC address of the router, and may be used by SR or LNS to determine if there’s a Rogue DHCP server in the customer’s building.

Another way for checking the IP and MAC address: Click on apple logo (upper left corner) => "About this Mac"=> "More Info" => (for Lion and Yosemite) "System Report" => "Network" => "Ethernet". (Shows both IP and MAC address). Note: on Yosemite, there is no "More Info" tab.

Other troubleshooting steps

  1. Find out what’s the OS[1]. E.g. Tiger (10.4), Leopard (10.5), Lion (10.7), Yosemite (10.10). Older OSs can be troubleshot like Tiger.
  2. Find the status of the NIC: Open System Preferences => Network. NOTE: In 10.4 you need to select "Network Status" from the 2nd drop-down menu to be able to look at the status of the NIC. In 10.5 the status is displayed when you select "Ethernet" from the list on the left.




"Built-in Ethernet is currently active and has the IP address [see list of IPs below]" Possible causes: Should have a live connection. If the customer still cannot access the internet, there may be a proxy server, manually entered DNS address or a 3rd party firewall. Solutions: Quit and re-open browser. Try visiting www.middlebury.edu (if the registration page appears, register the computer). Renew lease. Create a new location. Disable NIC / enable NIC. Try different browser. Reboot. Disable 3rd party firewalls (they are rare on Macs but do exist, e.g. Little Snitch, NetBarrier, Norton etc.). Invite customer to LIB202.

    1. "Built-in Ethernet is currently active but has a self-assigned IP address" OR"The cable for Built-in Ethernet is connected but your computer does not have an IP"Possible causes: The computer detected a cable, a jack, and some connection, however, it cannot talk to the DHCP server. Loose cable. Bad cable. Bad card.Solutions: Ensure that the cable is firmly plugged into the network card and a live jack. Create a new location. Try a different jack. Try a different cable. Reboot. Invite customer to LIB202.
    2. "The cable for Built-in Ethernet is not plugged in"Possible causes: The cable may be unplugged/loose on one end. The cable may be bad. The network card may have failed. Solutions: Ensure that the cable is firmly plugged into the network card and a live jack. Create a new location. Try a different jack. Try a different cable. Reboot. Invite customer to LIB202.
  1. Check the IP address. Refer to Network Troubleshooting to see what various IP addresses can tell you.

Information that we must have in a ticket

If you still haven’t resolved the issue, get some information from the customer and create a ticket:

  • Name and location (building, room #). Make sure we have their extension or cell #.
  • Jack ID (it’s on a silver or white tag around or ON the jack, e.g. "A-0-12").
  • 'IP address, MAC address and the result of running the "arp -a" command.



  1. <sup>Find OS version: Click on apple logo in top left corner of screen, select "About this Mac" and look in middle of the pop-up.</sup>
Powered by MediaWiki