In this room you can project from a laptop through VGA and HDMI or watch a DVD or Blu-ray film.
Turning the System On - Press the Power icon on the middle of the touchpanel screen. This will take you to the Main Menu. Selecting any source will turn the projector on. You can "mute" the projector if you do not want to immediately display what is on your screen. Press the Mute icon on the left side of the touchpanel screen.
Projecting from VGA - Press the Laptop VGA icon at the top on the left of the touchpanel screen. Connect the VGA cable to your computer, you should have projection , but if you don't, go to the troubleshooting section of the page.
Projecting from HDMI - Press the Laptop HDMI icon at the top on the left of the touchpanel screen. Connect the HDMI cable to your computer. You should have projections, but if you don't, go to the troubleshoot section of the page.
Playing a DVD/Blu-ray - Press the Blu-ray icon at the top on the right of the touchpanel screen. You might have to power on the Blu-ray player. Insert your disc and press play. You can control the Blu-ray player from the touchpanel.
Turning the System Off - Press the System Off icon at the bottom on the right of the touchpanel screen. Confirm that you want to turn the system off.
Troubleshooting - If you are have difficulties projecting, go to go/troubleshoot for more tips on troubleshooting projection problems or contact the Helpdesk at x2200